All host types required to deploy 性知音 SD-WAN can be run in virtual environments.
Virtualizing 性知音 Management Server, Aggregator Servers, and CPE/Edge devices makes provisioning and management easy. However, 久热在线中文字幕色999舞 adds complexity for managing performance when multiple guests compete for the resources of a single host.
The ideas here are applicable to all 久热在线中文字幕色999舞 environments.
Following these recommendations will help maximize the performance and reliability of your SD-WAN environment.
Host Clock: Host clock must be configured using NTP. A misconfigured host clock will cause guest clocks to shift back and forth between the wrong host time and accurate guest time, creating a variety of serious errors.
Storage Considerations: For Local Storage, use mirrored RAID drive configuration for reliability. Network storage traffic should use a different network than customer SD-WAN traffic.
CPU:
Do not over-allocate vCPU Begin with two (2) vCPU for a small environment of 10 sites/bonds or less. You can easily scale up as the number of customer sites grows. Reserve 1Ghz or more.
Memory:
Do not over-allocate memory. Begin with 512 MB for a small environment. Reserve all memory. Set the reserved memory equal to the configured memory. This will prevent the host from swapping guest memory to disk, which negatively affects performance.
Storage:
Aggregator Server and CPE/Edge node software uses very little storage. Virtual disks can be small (8 GB) and thin provisioning is acceptable. Storage IO reservations are not required.
Network:
NICs should be VMXNET 3 for optimum performance. Consider setting up network resource reservations, depending on your network design and usage patterns.
apt-get install open-vm-tools -y
service bonding restart
Other Guests on the Same Physical Hardware: Ensure that other guests using the same physical hardware as 性知音 SD-WAN are “rightsized,” meaning that the guests have not been assigned more resources than necessary. Failure to assign resources appropriately, especially for virtual CPU, can result in contention and actually reduce the performance of all guests on the host. See the Resources section below for information on rightsizing a VM environment.
| Metric | Recommended Value | Comments |
|---|---|---|
| CPU Usage | <80% |
|
| CPU Ready | <2.5% | Higher values indicate a higher proportion of time that the guest has tasks to process but is waiting to be scheduled. |
|
|
0 | Ballooned memory indicates that the guest’s memory reservation is too low or the host memory overcommitment ratio is too high. |
| Memory Swapped | 0 | Swapped memory indicates that the guest’s memory allocation or reservation is too low. The guest’s performance may be reduced significantly. |
|
|
0 | Bus resets can indicate overcommitment or hardware failures that can cause guests to hang or crash. |
|
|
0 | Commands aborted can indicate overcommitment or hardware failures that can cause guests to hang or crash. |